| Roeboats | |
| Corravoley, Ballydehob, Co. Cork, Ireland | |
| Contact: | Tiernan Roe |
| Telephone: | Reveal Telephone Number |
| View All Roeboats Listings | |
Description
The Cape Henry 21' is a very capable and versatile raised deck gaff cutter. She's also a very good looking boat. The raised deck configuration creates lots of space below and the cutter rig makes her easy to handle in whatever wind you might encounter. When the wind dies you can resort to the outboard that is in a well in the cockpit.
With her lovely balanced hull and lifting centreboard she makes a responsive and relaxing boat to sail and is perfect for exploring the out of the way coves and backwaters where larger boats can't go. When you arrive at your destination the cabin has two full size quarter berths and a truly massive v-berth, with porta potti under. There's a stove and sink combo, with running water, over a built in cool box to port and a counter and storage drawers to starboard. Each bunk has it's own reading light powered from a 40w solar panel mounted above the companion way hatch.
The Cape Henry would be the perfect boat for a family to spend many happy days and nights on the water. Either close to home or far afield as the boat is small enough to be trailered without any special requirements.
Please don't hesitate to contact Roeboats to discuss having your own Cape Henry 21' built.
Specifications
| Condition: | New build |
| Vessel type: | Gaff Cutter |
| Designer: | Dudley Dix |
| Builder: | Roeboats |
| Make: | Dudley Dix |
| Model: | Cape Henry 21 |
| Constructed: | 2023 |
| Berths: | 4 |
| Cabins: | 1 |
| Heads: | 1 |
| Nominal length: | 21' |
| Length over all: | 26' |
| Length of deck: | 21' |
| Length at waterline: | 20' |
| Beam: | 7' 11" |
| Maximum draft: | 4' 5" |
| Draft, keel down: | 4' 5" |
| Draft, keel up: | 1' 7" |
| Hull material: | Wood |
| Hull type: | Monohull |
| Hull colour: | Custom |
| Keel type: | Daggerboard Keel |
| Displacement: | 1 metric tons |
| Dry Weight: | 1 metric tons |
| Water capacity: | 10 Litres |
| Holding tank capacity: | 20 Litres |
Construction
Built using Lloyd's registered Joubert Marine Plywood and SP Gurit epoxy resin your boat will be low maintenance and long lasting. Not only will the epoxy resin protect the plywood from water intrusion it allows the use of the toughest two part marine paints that last and last.
Navigation Equipment
You're very welcome to specify your own navigation equipment but bear in mind that there is a limited amount of electriciy that can be produced from the fitted 40w solar panel.
Sails & Spars
Sails are custom made for each boat, there can be a large genoa or a Yankee head-sail as in the photos.
Electrics
40w Solar panel, reading red/white lights above each bunk and depth sounder.
Certification
Certified RCD category C
Location Map
Note: Indicated location is approximate general area only.